news

Contact us

Lianyungang Huade Petrochemical Machinery Co., Ltd. 

Tel: 86-518-86097577

Fax: 86-518-85525708

Mobile:86-18795550044

E-mail: hd@9zsu7.com

Web site: www.9zsu7.com

Address: 117 qu Feng Road, Haizhou Development Zone, Lianyungang City, Jiangsu Province

Web site  :  en.9zsu7.com 


What are the requirements for the design of liquid ammonia crane pipe

Your current location Home >> News >> Technical knowledge

What are the requirements for the design of liquid ammonia crane pipe

Date of release:2018-10-26 Author: Click:

Liquid ammonia is a colorless liquid, with a strong irritating smell of chemicals, so in transport to pay great attention to safety。 

The liquid ammonia crane tube will be used in the liquid ammonia transportation, and the setting requirement of the liquid ammonia crane pipe should also meet the conditions of ammonia transportation. 

Therefore, crane tube manufacturers talk about the design requirements of liquid ammonia crane tube. 

The main results are as follows: 1. The design pressure of the liquid ammonia crane pipe is generally not less than the setting pressure of the safety valve. 

2。 The selected pressure gauge should be adapted to the medium in the liquid ammonia crane tube。 

3. The accuracy of the pressure gauge used by the design pressure less than the 1.6MPa liquid crane tube shall not be less than 2.5. the accuracy of the pressure gauge used by the design pressure greater than or equal to the 1.6MPa liquid crane tube shall not be less than 1.6 grade. 

The limit value of the pressure gauge dial shall be 1.5 to 3.0 times the maximum allowable working pressure, and the diameter of the dial shall not be less than 100mm. 

4。 The liquid level meter should be installed in a position convenient for observation, otherwise other auxiliary facilities should be added。 

Large liquid crane pipes should also have centrally controlled facilities and alarm devices. 

The highest and lowest safe liquid levels on the level gauge shall be clearly marked. 

In addition, we should understand that the cut-off valve should not be installed between the safety valve and the liquid ammonia crane pipe; in order to realize the on-line calibration of the safety valve, the blasting disc device can be installed between the safety valve and the liquid ammonia crane pipe。 

The calibration and maintenance of pressure gauges shall be in accordance with the relevant provisions of the national metrology department. 

To learn more about the crane pipe, pay attention to the crane tube manufacturer Lianyungang huade Petrochemical Co., Ltd.


The address of this article:http://en.9zsu7.com/news/391.html

Key word:Cranetubemanufacturer,Cranetube,Automaticcranetube

Recently browse:

Please leave a message for us
Please input the message here, and we will contact you as soon as possible。
Country
Country
Company name
Company name
Email
Email
Contact person
Contact person
快赢彩票计划 快乐赛车开奖直播 快乐赛车免费计划软件 快乐赛车有没有分析的方法 千禧彩票是真的吗 快乐赛车代理怎么做的 快乐飞艇规则 上海快3 北京赛车pk10赔率最高的平台 湖北快3走势